Organic fertilizer dynamic batching and weighing system
Production introduction:
The raw materials are manually added (4 types of powdered materials, 1 type of granular materials) to the storage bin by the staff using a car to the feeding port. The storage bin is embedded with the material level detection function, and the red and green indicator lights indicate the on-site processing status. The green light means no load and the red light means full.
After starting the production line system, the feeding belt conveyor works according to the set flow rate of the system, and the Siemens inverter is used as the execution unit, and the metering belt conveyor performs dynamic measurement. The 5 raw materials are dynamically weighed according to the formula ratio, and the accuracy is 58!
At this time, the system automatically detects When the material is blocked or in the material state, the auxiliary material is carried out through the air hammer vibrator embedded in the storage bin. The normal unloading system will automatically operate according to the set program. If the auxiliary bucket fails to execute, the system will directly alert the operator through the sound and light alarm. The system is set before the batching, the mixer and the main conveyor must be open, when a batching cycle
After the end, the mixer completes the processing of the finished product, and the material is transferred to the warehouse, and the production is completed by two 25-40KG packaging machines.
The packaging and bagging methods of the materials are manual. After automatic packaging, it is transferred to the next process. The bag is reversed by the inverting conveyor, and the sub-pre-stacking preparation is performed by the leveling conveyor, and the palletizing robot station is prepared through infrared point control. In this plan, a palletizing robot is designed to separate two finished bag conveyor lines, which greatly improves production efficiency. The pallet is automatically sent to the station by the pallet library, which improves the production speed and further realizes the fully automated production mode!
The weighing data of raw materials and finished products are uploaded to the DCS management and control software, and the operation of each equipment has manual and automatic work
Mode, and display the working status indicator, realize a control. Data reports and shift records can be retrieved and inquired remotely.
Product Tags:
|
|
Organic Dynamic 0.9 Electromagnetic Vibrating Feeder Fertilizer Belt Conveyor Images
|
